[U-Boot-Users] FW: [440GX/JFFS]
Barbier, Renaud (GE Infrastructure)
Renaud.Barbier at ge.com
Wed Sep 22 18:21:40 CEST 2004
It is just going to the prompt. Here is printenv:
baudrate=9600
loads_echo=1
ethaddr=
ipaddr=192.168.67.1
serverip=192.168.67.189
netmask=255.255.255.0
ethact=ppc_440x_eth2
bootdelay=5
bootcmd=fsload;bootm 100000
bootargs=console=ttyS0,9600n8 root=/dev/nfs ip=bootp mem=62M
stdin=serial
stdout=serial
stderr=serial
Environment size: 265/65532 bytes
-----Original Message-----
From: wd at denx.de [mailto:wd at denx.de]
Sent: Wednesday, September 22, 2004 4:26 PM
To: Barbier, Renaud (GE Infrastructure)
Cc: u-boot-users
Subject: Re: [U-Boot-Users] FW: [440GX/JFFS]
In message <45ABD2373C33C4459D42B40EC4F346F2034C9B00 at FTWMLVEM03.e2k.ad.ge.com> you wrote:
> I got Linux starting using a uImage. THis must be the bit I missed=20
OK.
> However, still I cannot get it to autostart.
Why not? What's the problem?
Best regards,
Wolfgang Denk
--
Software Engineering: Embedded and Realtime Systems, Embedded Linux
Phone: (+49)-8142-4596-87 Fax: (+49)-8142-4596-88 Email: wd at denx.de
Horses just naturally have mohawk haircuts.
More information about the U-Boot
mailing list