[U-Boot-Users] loads command cannot transfer srec file
Wolfgang Denk
wd at denx.de
Mon Aug 22 14:06:27 CEST 2005
In message <1124704021.89a455bcS3092131 at student.rmit.edu.au> you wrote:
>
> I am using Windows Hyper Terminal for serial communication with the Accelen
> t board having pxa255 processor.
Please use shorter lines. Your text is nearly unreadable.
> I am getting the monitor command prompt. I have to download hello_world.sre
> c onto the flash.
> When i use loads 40004 i get
> ## Ready for S-Record download ...
> and then the system seems to do nothing.
This is to be expected. Please read the manual (DULG) how to use
S-Record download. Note that Windows Hyperterminal is *not* listed as
supported tool for this purpose.
> I cannot specify the path of the file to be downloaded.
This is then a problem with Hyperterminal. Use the recommended tools
instead.
> 1>>Please let me know what could be the problem with this and where is the
You're using the wrong tools.
> default path for file download set.
There is no default path. It's up to the terminal program to select
and send the appropriate file.
> 2>>I downloaded the hello_world.bin through the JTAG pin we have made and
> tried to run hello_world application using
> go 40004 Hello World! This is a test and i get number of junk characters li
> ke which i think could be because of some undefined instruction what shou
> ld be done in this case.
Debug the problem.
Best regards,
Wolfgang Denk
--
Software Engineering: Embedded and Realtime Systems, Embedded Linux
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
grep me no patterns and I'll tell you no lines.
More information about the U-Boot
mailing list