[U-Boot-Users] Xilinx EDK error message on libgen

[Peter Ryser]

Andrew,

have a look at XAPP542 
(http://direct.xilinx.com/bvdocs/appnotes/xapp542.pdf). It explains how 
to get started with U-Boot for Xilinx FPGAs.

- Peter


andrew.l.bomber at maxtek.com wrote:

>Hello, 
>
>I am trying to compile u-boot for the first time. My target board is a
>custom device with only a UARTLite, SPI Flash, and SDRAM with PPC on a
>Xilinx FPGA. I continually get the same error when I try to generate
>libraries. I am trying to generate the libraries through the EDK IDE. Is
>anyone on this board familiar with porting u-boot to a Xilinx device in EDK?
>If so could you help? The stand alone OS works just fine on this project
>before I changed the OS_NAME in the mss.
>
>
>The command that EDK 6.3i issues to generate libraries:
>libgen -mhs system.mhs -p xc2vp4fg256-6  system_u-boot.mss
>
>The error message:
>WARNING: The parameter USE_DCR for the intc driver has been deprecated.  Any
>reference to this parameter in the MSS file will be ignored.
>define_config_file: XNullHandler
>ERROR:MDT - Error while running "generate" for processor ppc405_0...
>make: *** [ppc405_0/lib/libxil.a] Error 2
>Done.
>
>Thanks,
>
>Andrew
>
>
>-------------------------------------------------------
>SF.Net email is Sponsored by the Better Software Conference & EXPO
>September 19-22, 2005 * San Francisco, CA * Development Lifecycle Practices
>Agile & Plan-Driven Development * Managing Projects & Teams * Testing & QA
>Security * Process Improvement & Measurement * http://www.sqe.com/bsce5sf
>_______________________________________________
>U-Boot-Users mailing list
>U-Boot-Users at lists.sourceforge.net
>https://lists.sourceforge.net/lists/listinfo/u-boot-users
>
>
>  
>