[U-Boot-Users] Re: PCI, Ethernet, IXDP425
wd at denx.de
Wed Jan 12 15:16:43 CET 2005
In message <004201c4f889$b1b825a0$1000000a at araav> you wrote:
> have i complained in my posts? although there is one: that the ixp port does
> not support pci support at all though you said "Just do it" to my
You sounded a bit aggressive to me, and you are wrong again: The IXP
port does support PCI:
> > I have a PCI Ethernet card on the board. I need to connect to the network
> > from u-boot via this device.
> btw, if you don't know the answer to questions, just don't answer:) there
> are many other users in the list ;)
Here you go again. You should not insult people who you ask for help.
I know EXACTLY what I'm speaking of. See here:
Date: 2005/01/09 17:12:27
* Patch by Jon Loeliger, 02 Sep 2004:
Reset monitor size back to 256 so environment can be written
to flash on MPC85xx ADS and CDS releases.
* Patch by Paolo Broggini, 02 Sep 2004:
Make BSS clearing on ARM systems more robust
* Patch by Yue Hu and Joe, 01 Sep 2004:
===>>> - add PCI support for ixp425;
===>>> - add EEPRO100 suppor tfor ixdp425 board.
* Fix problem with protected sector detection in driver/cfi_flash.c
Seems it's you who has no clue.
I don't blame you for that - I cannot expect that you spend so much
time with U-Boot like me, but then you should rather think twice what
I cannot help you if you continue to ignore what I'm trying to tell
Software Engineering: Embedded and Realtime Systems, Embedded Linux
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
They say a little knowledge is a dangerous thing, but it is not one
half so bad as a lot of ignorance. - Terry Pratchett, _Equal Rites_
More information about the U-Boot