[U-Boot-Users] BDI2000 with pxa255

[Hinko Kocevar]

Paugam Luc wrote:
> Hi,
> 
> There is a problem with your JTAG link or chain.
> The important line is: 
> 	- TARGET: Bypass check: 0x000000001 => 0x00000000
> It says roughly: (as you know, a JTAG chain is let say "a serial link looped") After setting all JTAG controllers into the JTAG chain to bypass mode, I sent a 1 (only 1 bit) and tried to get back this bit ... but in your case without success!
> 

So, this could mean that other (TDI,TDO) JTAG lines do not operate 
properly - or is this consequently because target was not reseted properly?

regards,
hk

-- 
hinko <dot> kocevar <at> iskramedical <dot> si
Hinko Kocevar, embedded systems developer
Iskra Medical d.o.o., Stegne 23, 1k LJ, SLO-EU

	"Aì rén"	|	[Analects XII:22]