[U-Boot-Users] Problem starting u-boot on Xilinx V2P
T.Lueck at IfEN.com
Wed Jul 6 08:52:22 CEST 2005
-----BEGIN PGP SIGNED MESSAGE-----
Cedric VINCENT wrote:
>>Another strange thing is, that I
>>only have 32MB RAM on board but not 128MB as the ml300 has. However, I
>>could not find any hardcoded RAM size in the source files for the ml300.
> Take a look into board/xilinx/ml300/ml300.c, it *is* hardcoded !
Indeed - that was the problem - I greped for the size (in hex and dec)
but _not_ for a formular ;-)
> As Wolgang said, "you cannot just use a configuration for one board
> and expect it to work on a different board". But if you change your
> config file and U-Boot still hangs after "Now running in RAM at ....."
> (don't forget to #define DEBUG) it may be a U-Boot incompatibility
> with some (new) version of GCC. If so, please mail me !
Well, probably I can - changing the size to the real size (which is 32MB
instead of 128) - u-boot boots up to the prompt. Probably some memory
test addressed memory above 32MB. So it works now.
Regarding the version of gcc, I use
ppc_405-gcc (GCC) 3.3.1 (MontaVista 3.3.1-3.0.10.0300532 2003-12-24)
Thanks for your helpfull hint!
IfEN - Gesellschaft für Satellitennavigation mbH
Dipl. Ing. Thorsten Lück
Tel.: +49 8121 2238-25
Fax : +49 8121 2238-11
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.0 (GNU/Linux)
-----END PGP SIGNATURE-----
More information about the U-Boot