[U-Boot-Users] CF 5282 fec.c

[Zachary Landau]

> I'm new on U-Boot and work on a MCF5282 port. I have modify the cvs
> source and U-Boot runs on my own MCF5282 board (I get a promt on serial
> line). But i get "Tx not ready" and "Tx Timeout" messages for each
> ethernet access.
> I discover the fec.c, and find out that only 10MBit haft duplex is use.
> Is there in implementation for full 100MBit use?

Jens,

Search the mailing list archives.  There are multiple posts about 5282
ports, and some specifically about the fec.

--
Zachary P. Landau <kapheine at gmail.com>