[U-Boot-Users] PPC440GX reset command doesn't work

[Howard, Marc]

Try putting a scope/logic analyzer on your SYSRESET* line to see if it
is getting pulled down when you try to reset from U-Boot.

Marc W. Howard


> -----Original Message-----
> From: u-boot-users-admin at lists.sourceforge.net 
> [mailto:u-boot-users-admin at lists.sourceforge.net] On Behalf 
> Of Andrew Wozniak
> Sent: Tuesday, June 07, 2005 10:48 AM
> To: tsawyer+u-boot at sandburst.com
> Cc: U-Boot mailing list
> Subject: Re: [U-Boot-Users] PPC440GX reset command doesn't work
> 
> Travis B. Sawyer wrote:
> > Andrew Wozniak wrote:
> > 
> >> Andrew Wozniak wrote:
> >>
> >>> We have a custom PPC440GX board running a ported version 
> of U-Boot based
> >>> on the OCOTEA codebase. Most U-Boot commands are working 
> - life is good.
> >>>
> > <SNIP>
> > 
> >>> Just wondering if anyone else with a PPC440 target had any special
> >>> modifications to make 'reset' work.
> >>
> >>
> > Nope, it just works, on 3 different 440gx targets I have.  The XES
> > XPedite1000, the Ocotea, and our custom hardware...
> 
> hmmm.... will have to investigate further.
> 
> Could our problem be related to how our PPC is configured from serial
> eeprom? Or might is be that DBCR (or some other control register) is
> misconfigured - disallowing a "system reset"?
> 
> Thanks for confirming proper 'reset' operation as currently 
> implemented.
> 
> > 
> > -travis
> > 
> > 
> 
> 
> 
> -------------------------------------------------------
> This SF.Net email is sponsored by: NEC IT Guy Games.  How far 
> can you shotput
> a projector? How fast can you ride your desk chair down the 
> office luge track?
> If you want to score the big prize, get to know the little guy.  
> Play to win an NEC 61" plasma display: http://www.necitguy.com/?r=20
> _______________________________________________
> U-Boot-Users mailing list
> U-Boot-Users at lists.sourceforge.net
> https://lists.sourceforge.net/lists/listinfo/u-boot-users
>