[U-Boot-Users] [Newbie] Question on U-Boot POST

Wolfgang Denk wd at denx.de
Wed Jun 15 21:17:40 CEST 2005

In message <3B58B875DBDE504F94D2A1A1C9DF6F1FF6EE36 at bglnt005.asia.ad.flextronics.com> you wrote:
>      My configuration is a U-Boot-1.1.2 working on MPC8280 based Rattler
> board. When I am trying to run Watchdog test on the card, it fails always.
>   In the config file. Rattler.h, I have the following related to watchdog:
>    #define CONFIG_WATCHDOG   
>    #define CONFIG_POST            (CFG_POST_CPU | \
>                                      CFG_POST_WATCHDOG )
>    Is there anything else that is missed out? Thanks for all the help
> provided.

The code was tested on MPC8xx only.

> ------_=_NextPart_001_01C57168.F2070150
> Content-Type: text/html
> Content-Transfer-Encoding: quoted-printable
> <HTML>

Please never post HTML on this list!

Best regards,

Wolfgang Denk

Software Engineering:  Embedded and Realtime Systems,  Embedded Linux
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
In the future, you're going to get computers as prizes  in  breakfast
cereals.  You'll  throw  them out because your house will be littered
with them.                                             - Robert Lucky

More information about the U-Boot mailing list