[U-Boot-Users] Question about MPC8272 HRCW

[Yuli Barcohen]

>>>>> Sam Song writes:

    Yuli> For MONITOR_BASE=TEXT_ADDR=0xFFF00000 you need
    Yuli> CFG_FLASH_BASE=0xFF800000. Check BDI initialisations and set
    Yuli> the HRCW to get the same values.

    Sam> Really? Sounds CFG_FLASH_BASE=0xFE000000 is also OK for HIGH
    Sam> BOOT situation. Am I right?

Generally speaking, it depends on the chip select initialisations. If
you set correct size (8MB in this case), TEXT_ADDR will not be mapped at
all with such CFG_FLASH_BASE=0xFE000000.

-- 
========================================================================
 Yuli Barcohen       | Phone +972-9-765-1788 |  Software Project Leader
 yuli at arabellasw.com | Fax   +972-9-765-7494 | Arabella Software, Israel
========================================================================