[U-Boot-Users] 440GX enet bridge init

[Neil Wilson]

While getting one of our boards running I noticed that in
u-boot/cpu/ppc4x/440gx_enet.c that the case 2 of
ppc_440x_eth_setup_bridge resets the value of zmiifer each time, I
believe this should be an OR as in the other cases.

I would have provided a patch but am in mid flow of porting the code.
Cheers.

Neil

--
Neil Wilson
Principal Engineer, Embedded Software
Airspan Communications Ltd.
Cambridge House, Oxford Road,
Uxbridge, Middx, UB8 1UN, UK.
Tel: +44(0)1895-467265

neilwilson at airspan.com
www.airspan.com