[U-Boot-Users] [PATCH] allow flash "ranges" to default to end of flash

Murray.Jensen at csiro.au Murray.Jensen at csiro.au
Thu Jun 30 07:50:30 CEST 2005

This patch modifies the flash "range" code slightly to allow a range to
"default" to the "end of the bank". Currently, you must specify
"<first>-<last>" where <first> and <last> are sector numbers (zero based)
within the "bank". This code allows you to say "<first>-" and <last> will
default to the sector number of the last sector in the "bank". I thought
I needed this - but now I don't use it anymore. However, the code might
still be useful to someone. Cheers!
Murray Jensen, CSIRO Manufacturing & Infra. Tech.      Phone: +61 3 9662 7763
Locked Bag No. 9, Preston, Vic, 3072, Australia.         Fax: +61 3 9662 7853
Internet: Murray.Jensen at csiro.au

To the extent permitted by law, CSIRO does not represent, warrant and/or
guarantee that the integrity of this communication has been maintained or
that the communication is free of errors, virus, interception or interference.

The information contained in this e-mail may be confidential or privileged.
Any unauthorised use or disclosure is prohibited. If you have received this
e-mail in error, please delete it immediately and notify Murray Jensen on
+61 3 9662 7763. Thank you.

-------------- next part --------------
A non-text attachment was scrubbed...
Type: text/x-patch
Size: 1892 bytes
Desc: cmd-flash-range-end.patch
Url : http://lists.denx.de/pipermail/u-boot/attachments/20050630/742135f5/attachment.bin 

More information about the U-Boot mailing list