[U-Boot-Users] after a sw reset, u-boot hangs in relocate_code

[Jaka Močnik]

hello!

I've ported U-Boot (1.1.2) over to a custom MPC8560 (PQ3) based board -
it works well, except that after a sw reboot (from linux kernel or
u-boot itself), it only gets to the part where it relocates itself to
RAM and then hangs - the last debug output is 

Relocating code to 07fd4000...

and the famous

Now running in RAM - U-Boot at: 07fd4000 never shows up.

has anyone experienced similar problems? any hints on what to look at?

regards,
        jaKa

-- 

w3: http://fish.homeunix.org/people/jaka
email: jaka at activetools.si