[U-Boot-Users] How to work 82551ER on PCI .

[Frank]

I had the same problem and it turned out to be another device on
the pci bus was competing for the bus at the same time. I
reconfigured my BAR registers and the problem went away...
--- Nobuhiro Iwamatsu <hemamu at t-base.ne.jp> wrote:
> Hi ,all .
> 
> I try to move U-BOOT with the board from which 82551ER is
> installed on PCI bus. 
> The following error messages are displayed when having tried
> to confirm the operation in the ping command and it doesn't
> operate normally though it is recognized on PCI bus. 
> 
> > ping 192.168.1.1
> i82559#0: Tx error buffer not ready
> Using i82559#0 device
> i82559#0: Tx error ethernet controller not ready.
> 
> Is there operate of 82551ER being confirmed on PCI bus?
> And ,  please teach the movement method and the place that
> should 
> be checked. 	
> 
> U-boot version : 1.1.2
> CPU : MPC5200
> ETHER NET : 82551ER
> GCC : gcc version 3.3.1
> 
> Thanks.
> -- 
> Nobuhiro Iwamatsu 
> 
> 
> 
> 
> 
> 
> -------------------------------------------------------
> SF email is sponsored by - The IT Product Guide
> Read honest & candid reviews on hundreds of IT Products from
> real users.
> Discover which products truly live up to the hype. Start
> reading now.
> http://ads.osdn.com/?ad_id=6595&alloc_id=14396&op=click
> _______________________________________________
> U-Boot-Users mailing list
> U-Boot-Users at lists.sourceforge.net
> https://lists.sourceforge.net/lists/listinfo/u-boot-users
> 


	
		
__________________________________ 
Celebrate Yahoo!'s 10th Birthday! 
Yahoo! Netrospective: 100 Moments of the Web 
http://birthday.yahoo.com/netrospective/