[U-Boot-Users] uboot and Pci in Pq2fads-ZU

[Bharath G - CTD , Chennai]

Hi,
	I am using a PQ2FADS-ZU board with u-boot.I have an option to change
jumpers and DIP Switches for setting the local bus to PCI mode.However
U-boot refuses proceed after Initialising DRAM.I went through the source and
initialises the LSDRAM after reading the BCSR.

Any pointers from the experts here would be really helpful.

TIA,

Cheers,

.Bharath.

In protocol design, perfection has been reached not when there is nothing
left to add, but when there is nothing left to take away. - Networking truth
#12, Ross Callon, RFC 1925 



-----Original Message-----
From: Der Herr Hofrat [mailto:der.herr at hofr.at]
Sent: Saturday, March 12, 2005 4:15 PM
To: u-boot-users at lists.sourceforge.net
Subject: [U-Boot-Users] autostart



HI !

 I have a problem with device initialisation in the kernel (all up and
running
 in u-boot) , so I wanted to have u-boot load the kernel, decompress it but 
 then not actually start it -  reading the u-boot manual I found that one 
 should use autostart no. The sequence I used was:

   setenv ipaddr 192.168.1.250
   setenv serverip 192.168.1.34
   tftpboot 0x350000 vmlinux.PPCBoot
   setenv autostart no 
   bootm 0x350000 

 but that simply kicks up the kernel and ends up in a panic becaues the 
 network and serial port initialization don't work in the kernel which I'm 
 trying to debug that - but I can't seem to stop the kernel with a
breakpoint
 as the xilinx tools (XMD) simply does not set it, so I wanted u-boot to
stop
 at the kernel entry and step it from there - no luck though.

 So how can I get u-boot to just do the decompression but not pass control
to 
 the kernel ?

thx !
hofrat


-------------------------------------------------------
SF email is sponsored by - The IT Product Guide
Read honest & candid reviews on hundreds of IT Products from real users.
Discover which products truly live up to the hype. Start reading now.
http://ads.osdn.com/?ad_id=6595&alloc_id=14396&op=click
_______________________________________________
U-Boot-Users mailing list
U-Boot-Users at lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/u-boot-users
DISCLAIMER 
This message and any attachment(s) contained here are information that is confidential, proprietary to HCL Technologies 
and its customers. Contents may be privileged or otherwise protected by law. The information is solely intended for the 
individual or the entity it is addressed to. If you are not the intended recipient of this message, you are not authorized to 
read, forward, print, retain, copy or disseminate this message or any part of it. If you have received this e-mail in error, 
please notify the sender immediately by return e-mail and delete it from your computer