[U-Boot-Users] RE: Rattler Board Flash access Problem

[Wolfgang Denk]

In message <001001c52a45$8dbb4ea0$1269cb0a at bgcw301> you wrote:
> 
> But when we power up the target (MPC8280 based Rattler board), it is
> getting continuous reset. Previously with the same configuration file it
> wasn't so. Do we need to make any change in the configuration file?

How could I guess? I don't know your hardware,  I  don't  know  which
changes you made to port U-Boot to that hardware, I don't know if you
configured  the  BDI  correctly - I don't even know if you're talking
about the configuration file for the BDI2000 or for U-Boot...

Sorry...

Wolfgang Denk

-- 
Software Engineering:  Embedded and Realtime Systems,  Embedded Linux
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
Power is danger.
	-- The Centurion, "Balance of Terror", stardate 1709.2