[U-Boot-Users] Ask for help----About UART output issues!

[James Zhou]

I had compiled the U-boot to u-boot.bin for board
Bubinga405EP.But after I had burned it to Flash and
poweron the board,I found there is error strings
output from the UART.I had set the baudrate of UART to
9600BPS,data bit:8,parity:No,stop bit:1,data stream
control:Xon/Xoff.I don't know what had happened in the
U-boot.

James


		
__________________________________ 
Do you Yahoo!? 
Yahoo! Small Business - Try our new resources site!
http://smallbusiness.yahoo.com/resources/