RES: [U-Boot-Users] booting uboot from flash on a memec evaluation board

[Gabriel Pundrich]

I am with a M5282EVB board. Can I do some similar?

Tnx,
Gabriel


-----Mensagem original-----
De:	grave [mailto:grave at ipno.in2p3.fr]
Enviada:	sex 18/3/2005 13:51
Para:	Wolfgang Denk
Cc:	u-boot-users at lists.sourceforge.net
Assunto:	Re : [U-Boot-Users] booting uboot from flash on a memec evaluation board
Le 18.03.2005 17:31:05, Wolfgang Denk a écrit :
> In message <1111149539l.12024l.3l at ipnnarval> you wrote:
> >
> > Do I need a specific and very simple code at address 0xfffffffc that
> 
> > jump to the flash address where there is the uboot code ?
> 
> Yes - typically a branch instruction.

Thanks, but the branch instruction only (as far as I understand)  
support 24 bits address jump and there is only room for one instruction  
in 0xfffffffc. So I tryed to set a jump to 0xffff8000 where there is  
some code that store a 32 bits address in the link register before  
trying a jump and it didn't work. Can you send me an example please ?

xavier



-------------------------------------------------------
SF email is sponsored by - The IT Product Guide
Read honest & candid reviews on hundreds of IT Products from real users.
Discover which products truly live up to the hype. Start reading now.
http://ads.osdn.com/?ad_ide95&alloc_id396&op=ick
_______________________________________________
U-Boot-Users mailing list
U-Boot-Users at lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/u-boot-users