[U-Boot-Users] changing TEXT_BASE before build
Sam Song
samsongshu at yahoo.com.cn
Sat Mar 19 02:16:32 CET 2005
"Robert P. J. Day" <rpjday at mindspring.com> wrote:
> board, i just wanted to clarify one thing -- since
> our current system
> flash is mapped to address 0xfc000000, and that's
> where we've been
> flashing planet core all this time, i'm assuming
> that i'd start by
> modifying the config.mk file and setting
>
> TEXT_BASE = 0xfc000000
Yeah, this is necessary if there is 64MB FLASH on your
board. Also pls set CFG_FLASH_BASE and
CFG_MONITOR_BASE as 0xfc000000 in
include/configs/RPXlite_DW.h. Perhaps you need
to change BRO && OR0 and other register value in this
file in a comparison with Planetcore later:-)
Good luck,
Best regards,
Sam
_________________________________________________________
Do You Yahoo!?
150万曲MP3疯狂搜,带您闯入音乐殿堂
http://cn.rd.yahoo.com/mail_cn/tag/yisou/music/*http://music.yisou.com/
美女明星应有尽有,搜遍美图、艳图和酷图
http://cn.rd.yahoo.com/mail_cn/tag/yisou/image/*http://image.yisou.com
1G就是1000兆,雅虎电邮自助扩容!
http://cn.rd.yahoo.com/mail_cn/tag/1g/*http://cn.mail.yahoo.com/event/mail_1g/
More information about the U-Boot
mailing list