[U-Boot-Users] U-boot error while booting uclinux image

[Wolfgang Denk]

In message <8BA96ECA9C4857499378F62796981B4334A32F at zch01exm02.ap.freescale.net> you wrote:
> 
> I now working on a MCF5249 EVB board, and porting u-boot for it which based on the ESD/TASREG(also based on MCF5249) board.
> I'm using RTL8019AS for the Ethernet adapter and it works well for TFTP download, but the uclinux image can not run, and if anyone 
> Have experience please help me, thanks!

Even if you re-post this message another three  times  yuour  chances
for a uyseful reply will not grow. On contrary.

> => go 20000
> ## Starting application at 0x00020000 ...`

You are not supposed to start Linux using the "go"  command.  You  re
supposed  to  use  the "bootm" command instead. I told you before. As
you seem to continue to ignore me, I will do the same now.

Best regards,

Wolfgang Denk

-- 
Software Engineering:  Embedded and Realtime Systems,  Embedded Linux
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
"God is a comedian playing to an audience too afraid to laugh."
- Voltaire