[U-Boot-Users] A&M Rattler8248 ethernet config

tony.ford at quadrics.com tony.ford at quadrics.com
Thu May 5 10:46:31 CEST 2005


Hi guys,

I've managed to get to the bottom of my problem. It would seem 
that when I compile the sources out of CVS the resulting u-boot.bin
file is 197320 bytes big, (192K + 712bytes). This is greater than
the 192K reserved for the monitor in include/configs/Rattler.h

When I saveenv the environment vars after initial boot this 
starts writing at CFG_MONITOR_BASE + CFG_MONITOR_LEN, 
scribbling over the last 712 bytes of the monitor.
Once I up the monitor length to 256 bytes it all just works.

Many thanks for your speedy feedback.

--
> -----Original Message-----
> From: Yuli Barcohen [mailto:yuli at arabellasw.com]
> Sent: 03 May 2005 20:08
> To: Tony Ford
> Cc: u-boot-users at lists.sourceforge.net
> Subject: Re: [U-Boot-Users] A&M Rattler8248 ethernet config
> 
> 
> >>>>> Tony Ford writes:
> 
>     Tony> Hi, I've got a basic u-boot port going on this card 
> and am now
>     Tony> looking at getting ethernet working.
> 
> What's wrong with the U-Boot port for to this board which 
> already is in
> CVS?
> 
> -- 
> ==============================================================
> ==========
>  Yuli Barcohen       | Phone +972-9-765-1788 |  Software 
> Project Leader
>  yuli at arabellasw.com | Fax   +972-9-765-7494 | Arabella 
> Software, Israel
> ==============================================================
> ==========
> 
> 




More information about the U-Boot mailing list