[U-Boot-Users] Re: Low-boot configuration for MPC8272ADS

Bastos Fernandez Alexandre ALEBAS at televes.com
Wed Nov 2 09:28:17 CET 2005


Dmytro,

Please apply my patch with Flash HRCW for MPC8272ADS and try
then the MPC8272ADS_lowboot_config. This worked fine for me

http://article.gmane.org/gmane.comp.boot-loaders.u-boot/19395

Best regards

Alex BASTOS

> -----Original Message-----
> To: u-boot-users at lists.sourceforge.net
> From:  Dmytro Bablinyuk <dmytro.bablinyuk at rftechnology.com.au>
> Date:  Wed, 02 Nov 2005 16:39:12 +1100
> Subject: [U-Boot-Users] Re: Low-boot configuration for MPC8272ADS
> 
> 
> > 1. I have updated (latest snapshot) u-boot:
> > 
> > include/configs/MPC8260ADS.h
> > 
> >  #define CFG_HRCW_MASTER 0x0e72b605
> > 
> > board/mpc8260ads/config.mk
> > 
> >   TEXT_BASE = 0xff800000
> 
> 1. I tried 'make MPC8272ADS_lowboot_config' but it keeps resetting with 
> or without BDI attached (JP9 in position MEMORY, SW2 is FLASH ON).
> 
> 2. Burn (to burn I need to move JP9 in position BCSR, otherwise it's 
> just resetting)
>   8272>load
>   8272>unlock 0xff800000 0x40000 32
>   8272>erase 0xFF800000 BLOCK
>   8272>prog 0xFF800000 u-boot.bin BIN
> 
> 3. Move JP9 in position MEMORY
> 
> 4. Power cycle
> 
> 5. Board keeps resetting with or without BDI.
> 
> Can anybody help, please?
> Thank you
> 
> 
> 
> 




More information about the U-Boot mailing list