[U-Boot-Users] Re: Low-boot configuration for MPC8272ADS

[Dan Malek]

On Nov 2, 2005, at 4:55 PM, Dmytro Bablinyuk wrote:

> One more question, so it looks like BDI was depending on HRCW  - on 
> target board we would have a blank flash - how do we burn it using BDI 
> (at first time we will not have a HRCW in it)?

The newest version of BDI firmware has the ability to set a HRCW out of 
reset,
so no more worries about flash contents or reset configuration.


	-- Dan