[U-Boot-Users] AMCC Yellowstone board update

[Steven Blakeslee]

Attached is a patch to update the support for the AMCC Yellowstone
board.  It does the following.
 
1.  Enable the PCI interrupt.  I submitted a patch previously that did
this same thing.
2.  Disable the FLASH write protect in the board control and status
registers.
3.  Added a function to dynamically figure a value for the
SDRAM0_TR1[RDCT].  This value needs to be adjusted on each boot and any
440 designs with DDR should do this.
-------------- next part --------------
A non-text attachment was scrubbed...
Name: yellowstone-patch
Type: application/octet-stream
Size: 6268 bytes
Desc: yellowstone-patch
Url : http://lists.denx.de/pipermail/u-boot/attachments/20051108/76586c0c/attachment.obj