[U-Boot-Users] Replacing AT91 u-boot

[kentropy]

> > May be into boot.bin there were some setting necessary for the system ?
> 
> Nargh. Please forget boot.bin. You will not need it any more.
> 
> > AFAIK nobody (either Atmel) uses u-boot stored at the beginning of the flash
> > (as many others ARM board producers do), but AT91 uses a pre-bootloader.
> 
> I don't know where you got this "knowledge" from, but it is plain wrong.


Confusing news from AT91 website about boot.bin / loader.bin
[
You need to download a "boot.bin" into the first sector.
The boot.bin may need to know about which flash you are using.
loader.bin has the same problem.
.snip.
Ulf Samuelsson
]