[U-Boot-Users] A question about the raminit in u-boot

[Wolfgang Denk]

In message <A9DE2BAF233E444FA9C5E77A5825A01E86506F at ydmail.sbell.com.cn> you wrote:
>
>  I use a 128M board, the u-boot is OK, but when I changed the same
> config board, except the ram changed to 256M, 
>  it crashed when  going into relocate_code() in board.c, and not going
> into board_init_r(), I had changed in mpc8260ADS.c  initdram(),
>  from 128 to 256, and changed the BR2 registers in mpc8260ADS.h.  What's
> the other need to be changed?  thanks!

Please read the FAQ at http://www.denx.de/twiki/bin/view/DULG/UBootCrashAfterRelocation

Best regards,

Wolfgang Denk

-- 
Software Engineering:  Embedded and Realtime Systems,  Embedded Linux
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
Generally speaking, there are other ways to accomplish whatever it is
that you think you need ...                               - Doug Gwyn