[U-Boot-Users] Boot Problem

[batsayan.das at tcs.com]

Hello,

I would like to boot the OMAP5912 board from u-boot.
Memory layout is :
FLASH :         Starts from 0x0000 0000   (32MB)
SDRAM:  0x1000 0000 to 0x1200 0000  (32 MB)


I used the kernel Image with DHCP Support = ON. 

I copied the uImage at 0x0001 0000 and uRamdisk at 0x0010 0000

*********************LOG*****************************
OMAP5912 OSK # tftp 10000000 uImage
OMAP5912 OSK # cp.b 10000000 100000 b67e4
OMAP5912 OSK # imi 100000
## Checking Image at 00100000 ...
   Image Name:   Linux-2.4.20_mvl31-omap5912_osk
   Image Type:   ARM Linux Kernel Image (uncompressed)
   Data Size:    747428 Bytes = 729.9 kB
   Load Address: 10008000
   Entry Point:  10008000
   Verifying Checksum ... OK


OMAP5912 OSK # tftp 10000000 uRamdisk
OMAP5912 OSK # cp.b 10000000 1000000 16f4eb
OMAP5912 OSK # imi 1000000
## Checking Image at 01000000 ...
   Image Name:   Test Ramdisk Image
   Image Type:   ARM Linux RAMDisk Image (gzip compressed)
   Data Size:    1504427 Bytes =  1.4 MB
   Load Address: 11000000
   Entry Point:  11000000
   Verifying Checksum ... OK

OMAP5912 OSK # setenv bootargs mem=32M console=ttyS0,115200n8 
root=/dev/rd/0 ramdisk_start=1000000

OMAP5912 OSK # print

baudrate=115200
ethaddr=00:0E:99:02:06:7D
bootdelay=10
bootfile=/tftpboot/omap/dhcp_uImage
hostname=tqm
stdin=serial
stdout=serial
stderr=serial
filesize=16f4eb
fileaddr=10000000
gatewayip=172.18.19.253
netmask=255.255.248.0
ipaddr=172.18.20.198
serverip=172.18.20.141
bootargs=mem=32M console=ttyS0,115200n8 root=/dev/rd/0 
ramdisk_start=1000000

Environment size: 346/131068 bytes
OMAP5912 OSK # bootm 100000

## Booting image at 00100000 ...
   Image Name:   Linux-2.4.20_mvl31-omap5912_osk
   Image Type:   ARM Linux Kernel Image (uncompressed)
   Data Size:    747428 Bytes = 729.9 kB
   Load Address: 10008000
   Entry Point:  10008000
   Verifying Checksum ... OK
OK

Starting kernel ...

Uncompressing Linux...................................................
......
.....
Backtrace:
Function entered at [<c00c0fa8>] from [<c0049fc0>]
 r7 = 00000000  r6 = FFFFFFEA  r5 = C03FA120  r4 = C03FA140
Function entered at [<c0049ef0>] from [<c0008ecc>]
Function entered at [<c0008e68>] from [<c0009094>]
 r8 = 00000001  r7 = C018BD54  r6 = 00000000  r5 = C01874D4
 r4 = 00000000
Function entered at [<c0009020>] from [<c001829c>]
Function entered at [<c00181dc>] from [<c0018040>]
 r6 = C01B6728  r5 = C0176000  r4 = 00000000
Function entered at [<c001802c>] from [<c001bcac>]
Code: 1a00002c e2522004 4282c004 4a00001b (e4913004)
Kernel panic: Attempted to kill init!

**************************LOG END***********************************


I also tried with 
=> setenv bootargs root=/dev/ram rw
=> bootm 100000 1000000
But it also does not work,

I think I made some mistake by passing the correct kernel parameter. What 
might be the correct bootargs value? The same uImage and uRamdisk works 
fine if the ramdisk image is mounted by NFS with the bootargs (setenv 
bootargs console=ttyS0,115200n8 noinitrd rw ip=dhcp root=/dev/nfs 
nfsroot=172.18.22.125:/mnt, nolock mem=30M)

What am I missing?


Now I tried with uImage without DHCP support which gives the following log

******LOG WITHOUT DHCP **************
OMAP5912 OSK # bootm 100000 1000000
......
OMAP flash: using static partition definition
Creating 5 MTD partitions on "omap-flash":
0x00000000-0x00020000 : "BootLoader"
0x00020000-0x00040000 : "Params"
0x00040000-0x00240000 : "Kernel"
0x00240000-0x01000000 : "Flash0 FileSys"
0x01000000-0x02000000 : "Flash1 FileSys"
Linux Kernel Card Services 3.1.22
  options:  none
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP
IP: routing cache hash table of 512 buckets, 4Kbytes
TCP: Hash tables configured (established 2048 bind 4096)
IP-Config: Incomplete network configuration information.
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
802.1Q VLAN Support v1.7 Ben Greear <greearb at candelatech.com>
All bugs added by David S. Miller <davem at redhat.com>
NetWinder Floating Point Emulator V0.95 (c) 1998-1999 Rebel.com
Root-NFS: No NFS server available, giving up.
VFS: Unable to mount root fs via NFS, trying floppy.
VFS: Cannot open root device "nfs" or 02:00
Please append a correct "root=" boot option
Kernel panic: VFS: Unable to mount root fs on 02:00
********************END***********************

What is the general rule to set bootargs? 



Batsayan Das
Tata Consultancy Services Limited
Mailto: batsayan.das at tcs.com
Website: http://www.tcs.com

Notice: The information contained in this e-mail message and/or attachments to it may contain confidential or privileged information.   If you are not the intended recipient, any dissemination, use, review, distribution, printing or copying of the information contained in this e-mail message and/or attachments to it are strictly prohibited.   If you have received this communication in error, please notify us by reply e-mail or telephone and immediately and permanently delete the message and any attachments.  Thank you
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.denx.de/pipermail/u-boot/attachments/20050923/0b4fd46d/attachment.htm