[U-Boot-Users] Testing rewrite of NAND code?

[Mike Rapoport]

I've made several tests of the new NAND code on a custum board based on mpc8272.

Read worked for me just fine for both "raw data" read and JFFS2
functions (ls and fsload).

When I tried to write data to the NAND flash using the command
=> nand write.jffs2 400000 200000 400000

the system hanged right after printing:
"NAND write: device 0 offset 2097152, size 4194304 ...  4194304 bytes
written: OK"

As far as I understood, the "erase" is still not implemented.

--
Sincerely yours,
Mike Rapoport.