[DNX#2006040142000964] [U-Boot-Users] WARNING: in ext2fs.c

[DENX Support System]

Hello list,

inside the automatic U-Boot patch tracking system a new ticket
[DNX#2006040142000964] was created:

<snip>
> 
> 
> 	In function: ext2fs_read_file(ext2fs_node_t node, int pos, unsigned
> int len, char *buf)
> 
> 	You may not be getting all the bytes you requested in the 'len'
> parameter. Your requested length might be improperly adjusted.
> 	----------------------- Code snippet -------------
> 	unsigned int filesize = node->inode.size;
> 
> 	/* Adjust len so it we can't read past the end of the file.  */
> 	if (len > filesize) {
> 	len = filesize;
> 	}
> -----------------------------------------------------------
> 
> "len" is the native requested size, while "filesize" is the files real
> size,
> but byte-swapped and the two are being compared. As long as the
> byte-swapped
> length value is larger than the requested size value, then you'll never
> have
> a problem.
> 
> Now assume the file is 2meg and you requested 2meg.
> 
> IF(  len=200000 (2meg)    >  filesize=2000(2meg byte-swapped) )
> THEN	len = filesize
> 
> You end up getting only 2000 bytes.
> 
> 	The initialization of filesize should be:
> 	 unsigned int filesize = __le32_to_cpu (node->inode.size);
> 	Not:
> 	unsigned int filesize = node->inode.size;
> 
> 	(440gx)
> 	-John Roberts
> 
> 
> 
> 
> 
> -------------------------------------------------------
> This SF.Net email is sponsored by:
> Power Architecture Resource Center: Free content, downloads,
> discussions,
> and more. http://solutions.newsforge.com/ibmarch.tmpl
> _______________________________________________
> U-Boot-Users mailing list
> U-Boot-Users at lists.sourceforge.net
> https://lists.sourceforge.net/lists/listinfo/u-boot-users
</snip>

Your U-Boot support team