[DNX#2006040142001187] [U-Boot-Users] Xilinx ML403/PPC U-Boot support

[DENX Support System]

Hello list,

inside the automatic U-Boot patch tracking system a new ticket
[DNX#2006040142001187] was created:

<snip>
> 
> >Careful.  ML403 reference design (as-is) is not using the Xilinx option
> >of using side-by-side data access (32-bit fetch out of a single 16-bit
> >flash), so XIP (execution in place) is evidently NOT supported in ML403.
> > However, I had a new bit file built with side-by-side data access
> >enabled, but haven't yet execute out of flash (no need because ML403 has
> >a big memory.)  But it correctly fetches 32-bit now.  Ping me in a week
> >on my progress with XIP and flash.
> >
> Hmm, why do you need that? The ML403 has two flash chips and with that 
> allows 32 bit wide accesses. That allows you to access the whole flash 
> space and should give you much better performance than executing out of 
> a 16 bit wide flash.
> 
> - Peter
> 
> 
> 
> 
> 
> 
> -------------------------------------------------------
> This SF.net email is sponsored by: Splunk Inc. Do you grep through log
> files
> for problems?  Stop!  Download the new AJAX search engine that makes
> searching your log files as easy as surfing the  web.  DOWNLOAD SPLUNK!
> http://sel.as-us.falkag.net/sel?cmd=lnk&kid=103432&bid=230486&dat=121642
> _______________________________________________
> U-Boot-Users mailing list
> U-Boot-Users at lists.sourceforge.net
> https://lists.sourceforge.net/lists/listinfo/u-boot-users
</snip>

Your U-Boot support team