[DNX#2006040142001258] [U-Boot-Users] [PATCH] Make blackfin configuration [...]

DENX Support System support at denx.de
Sat Apr 1 00:50:21 CEST 2006

Hello list,

inside the automatic U-Boot patch tracking system a new ticket
[DNX#2006040142001258] was created:

> Hi Wolfgang,
> It's great the Richard's blackfin patch has been applied. But the
> patch it's really old and has some obsolete codes. So I made a patch
> against the current git repository. After applied the patch, the uboot
> can be compiled and work properly on the BF533 STAMP/EZKIT board.
> The patch is based on following commit ID in the current U-boot git
> repository.
> ============================================================
> commit ff7fefe6797246b2748530f965f2e41de34a982a
> Author: Wolfgang Denk <wd at pollux.denx.de>
> Date:   Mon Mar 13 12:37:35 2006 +0100
>     Apply SoC concept to arm926ejs CPUs, i.e. move the SoC specific
> timer and
>     cpu_reset code from cpu/$(CPU) into the new cpu/$(CPU)/$(SOC)
> directories
>     Patch by Andreas Engel, 13 Mar 2006
> ============================================================
> Changelog entry:
> * Make blackfin pass compilation with the current toolchain.
>   Patch by Aubrey.Li <aubrey.li at analog.com>
> Thanks,
> -Aubrey

Your U-Boot support team

More information about the U-Boot mailing list