[U-Boot-Users] [PATCH] SPI relocation fix

[Vladimir Gurevich]

Hello David,

David Ho wrote:

>This is required to relocate SPI on the MPC852T.  Presumably, similar
>fix is required for relocating I2C.
>  
>
I assume you've applied my patch, correct?

Normally, at the powerup  rpbase should be set to the default values, so 
no programming is required. Otherwise, the microcode patch downloading 
code is programming them correctly.

Are you sure you really need these? Could it be that you somehow hve 
overwritten the parameter area? What are the values in rpbase if you do 
not set them explicitly?

As I said, I do use MPC852T and everything works fine.

Happy hacking,
Vladimir