[U-Boot-Users] u-boot serial console not working
Wolfgang Denk
wd at denx.de
Mon Apr 3 22:17:06 CEST 2006
In message <loom.20060403T205756-772 at post.gmane.org> you wrote:
> i'm using a MPC 8280 Rattler board. i'm trying to port u-boot on to it. but the
> serial console is not coming on the hyperterminal. i have debugged teh code with
> BDI debugger and has checked that the program counter goes and waits at the
> serial_getc() function in smc.c. but the serial console doesn't appear at all.
> i'm using u-boot 1.1.4
Make sure that you have h/w and s/w flow control diabled in your
terminal emulation program. If this doesn't help, then check the
clock and BRG settings and the clock routing.
Best regards,
Wolfgang Denk
--
Software Engineering: Embedded and Realtime Systems, Embedded Linux
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
There's nothing disgusting about it [the Companion]. It's just
another life form, that's all. You get used to those things.
-- McCoy, "Metamorphosis", stardate 3219.8
More information about the U-Boot
mailing list