[U-Boot-Users] U-boot 1.1.3 support Bzip2 compression?

Clare Huang cmhuang.eic93g at nctu.edu.tw
Wed Aug 2 15:38:06 CEST 2006


Hi Denk,

I use the current code from u-boot.git.
But the result is the same :
--------------------------------------------------------------------
U-Boot 1.1.4 (Aug  1 2006 - 07:40:21)

CPU:   OMAP1611b at 96.0 MHz (DPLL1=96.0 MHz)
Board: OSK5912
DRAM:  32 MB
Flash: 32 MB
In:    serial
Out:   serial
Err:   serial
Hit any key to stop autoboot:  0
OMAP5912 OSK # tftpboot 0x10000000 uImage
Using MAC Address 00:00:00:11:22:33
TFTP from server 123.1.1.1; our IP address is 123.1.1.100
Filename 'uImage'.
Load address: 0x10000000
Loading: #################################################################
         #################################################################
         #################################################################
         ################################
done
Bytes transferred = 1159854 (11b2ae hex)
OMAP5912 OSK # imi

## Checking Image at 10000000 ...
   Image Name:   2.6.15
   Image Type:   ARM Linux Kernel Image (bzip2 compressed)
   Data Size:    1159790 Bytes =  1.1 MB
   Load Address: 10c08000
   Entry Point:  10c08000
   Verifying Checksum ... OK
OMAP5912 OSK # run nfscmd_q
## Booting image at 10000000 ...
   Image Name:   2.6.15
   Image Type:   ARM Linux Kernel Image (bzip2 compressed)
   Data Size:    1159790 Bytes =  1.1 MB
   Load Address: 10c08000
   Entry Point:  10c08000
   Verifying Checksum ... OK
   Uncompressing Kernel Image ... data abort
pc : [<1108fc88>]          lr : [<000841a9>]
sp : 10c3f948  ip : 00000056     fp : 000000bd
r10: 0ae90c29  r9 : 10c3f94d     r8 : 10c3ffdc
r7 : 007c86b3  r6 : 00000056     r5 : 00037901  r4 : 00000001
r3 : 21dc2629  r2 : 10c6fcbd     r1 : 000dbb8e  r0 : 10c601a8
Flags: Nzcv  IRQs off  FIQs off  Mode SVC_32
Resetting CPU ...
--------------------------------------------------------------------

Any kindly response is appreciated ~

Best Regards,
Clare
----- Original Message ----- 
From: "Wolfgang Denk" <wd at denx.de>
To: "Clare Huang" <cmhuang.eic93g at nctu.edu.tw>
Cc: <u-boot-users at lists.sourceforge.net>
Sent: Wednesday, August 02, 2006 4:45 PM
Subject: Re: [U-Boot-Users] U-boot 1.1.3 support Bzip2 compression?


In message <00bf01c6b60d$f644c550$c9010165 at ClareHuang> you wrote:
>
> My platform is OMAP5912osk.
...
> In /u-boot-1.1.3/include/configs/omap5912osk.h, if I use the original > 
> config :

Please try using current code, i. e. top of git repository.


> ------=_NextPart_000_00BC_01C6B650.FE532AA0
> Content-Type: text/html;
> charset="big5"
> Content-Transfer-Encoding: quoted-printable

And NEVER post HTML on this list!!

Best regards,

Wolfgang Denk

-- 
Software Engineering:  Embedded and Realtime Systems,  Embedded Linux
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
How many seconds are there in a year? If I tell you there are 3.155 x
10^7, you won't even try to remember it. On the other hand, who could
forget that, to within half a percent, pi seconds is a nanocentury.
                                                - Tom Duff, Bell Labs 





More information about the U-Boot mailing list