[U-Boot-Users] How to include ML403 supported by U-boot

[Liu Dave-r63238]

Sorry, please ignore the email.

> -----Original Message-----
> From: u-boot-users-bounces at lists.sourceforge.net 
> [mailto:u-boot-users-bounces at lists.sourceforge.net] On Behalf 
> Of Liu Dave-r63238
> Sent: Friday, August 18, 2006 9:16 AM
> To: Ming Liu; wd at denx.de
> Cc: u-boot-users at lists.sourceforge.net
> Subject: Re: [U-Boot-Users] How to include ML403 supported by U-boot
> 
> Hi Liu Ming,
> 
> I want to know where you got the ML403 board from? Are you in china?
> If in china, where I can get/buy the board? From xilinux or 
> avnet ? Thank you.
> 
> -Dave
> 
> > -----Original Message-----
> > From: u-boot-users-bounces at lists.sourceforge.net
> > [mailto:u-boot-users-bounces at lists.sourceforge.net] On 
> Behalf Of Ming 
> > Liu
> > Sent: Friday, August 18, 2006 4:10 AM
> > To: wd at denx.de
> > Cc: u-boot-users at lists.sourceforge.net
> > Subject: [U-Boot-Users] How to include ML403 supported by U-boot
> > 
> > Dear wolfgang,
> > Now I am trying to use u-boot to boot my Linux kernel
> > image(2.6.16) using tftp and then mount the file system 
> using NFS in 
> > ML403 board. But I noticed that in U-Boot 1.1.4, there is no ML403 
> > supported.(There is only ML300
> > supported.) So can you tell me how to make ML403 supported 
> by U-Boot? 
> > Shall I write the specific board configure by myself, or 
> there is some 
> > patch for it? I have asked this question before but nobody 
> give me an 
> > exact answer.
> > So I think it's better to ask the author directly. Thanks for your 
> > help.
> > 
> > Regards
> > Ming
> > 
> > _________________________________________________________________
> > 与联机的朋友进行交流，请使用 MSN Messenger:  http://messenger.msn.com/cn
> > 
> > 
> > 
> 
>