[U-Boot-Users] [DNX#2006082442000011] [PATCH] harden for memory DIMM dete [...]

[DENX Support System]

Hello list,

inside the automatic U-Boot patch tracking system a new ticket
[DNX#2006082442000011] was created:

<snip>
> Improved the memory DIMM detection for the Yucca 440SPe board for the
> case where a memory DIMM is falsely detected as present.
> 
> This issue is seen on some AMCC Yucca 440SPe validation boards if only
> one 512MB memory DIMM is installed, i.e. DIMM slot 0 is populated and
> DIMM slot 1 is empty.  In this case, U-Boot does not correctly detect
> that there is only one DIMM memory module installed and will falsely
> detect two DIMM memory modules are present and therefore U-Boot will not
> calculate the correct amount of total memory and u-boot will not booting
> up.
> 
>  
> Signed-off-by: Adam Graham <agraham at amcc.com>
> 
> CHANGELOG:
> 
> * Harden the U-Boot memory DIMMs detection for the AMCC Yucca 440SPe
> board.
>   Patch by Adam Graham <agraham at amcc.com>, 23 Aug 2006
> 
> ---
> --------------------------------------------------------
> 
> CONFIDENTIALITY NOTICE: This e-mail message, including any attachments,
> is for the sole use of the intended recipient(s) and contains
> information that is confidential and proprietary to Applied Micro
> Circuits Corporation or its subsidiaries. It is to be used solely for
> the purpose of furthering the parties' business relationship. All
> unauthorized review, use, disclosure or distribution is prohibited. If
> you are not the intended recipient, please contact the sender by reply
> e-mail and destroy all copies of the original message.
</snip>

Your U-Boot support team