[U-Boot-Users] MPC8272 -- FLASH

[Lieng, Shee]

Hi Alex,


	I am so glad to receive your reply. I am trying to flash the
chip but I am not sure what the correct procedures are. Therefore, I was
trying U-boot, and other possible approaches.  I have mpc8272 board. I
have BDI2000 as well. Could you Please show me the FLASH procedures that
tells how to use BDI2000 flash.

Thanks
Jack
    

-----Original Message-----
From: Alex Zeffertt [mailto:ajz at cambridgebroadband.com] 
Sent: Friday, August 25, 2006 4:14 AM
To: Lieng, Shee
Cc: u-boot-users at lists.sourceforge.net
Subject: Re: [U-Boot-Users] MPC8272 -- FLASH

Lieng, Shee wrote:
> Hi to whom it may concern,
>  
>  
>     I have MPC8272 board and I am looking for the FLASH procedures. 
> Currently, I am trying to FLASH this board but having problem to write

> on top of the FLASH from FFF0 0000 to FFF8 0000. If you have any 
> information and ideas how to FLASH the chip could you please let me
know.
>  
> thanks
> Jack
>  

I'm not sure what you mean.  Are you having trouble with writing to
flash from u-boot, or from your debugger.  If the latter, what debugger
are you using?  Also, what board are you using?

I've got an MPC8272ADS board and I used a BDI2000 to write the flash
with no problems.  I used the following config file:


	ftp://ftp.denx.de/pub/BDI2000/MPC8260ADS.cfg


Alex