[U-Boot-Users] MPC8272 -- FLASH

[Lieng, Shee]

Hi Alex,


	Board: MPC8272ADS 
	Debugger connection: BDI 2000
	situation: I just found a flash chip that has U-boot on top. 
	GOAL: I am trying to find a method to flash the FLASH chip. 


	Do you know whether U-boot can be used to flash the board? OR do
you have any other method to flash.

Thanks
Jack



-----Original Message-----
From: Alex Zeffertt [mailto:ajz at cambridgebroadband.com] 
Sent: Friday, August 25, 2006 9:42 AM
To: Lieng, Shee
Cc: u-boot-users at lists.sourceforge.net; Kannan, Arun
Subject: Re: MPC8272 -- FLASH



Lieng, Shee wrote:
> Hi Alex,
> 
> 
> 	I am so glad to receive your reply. I am trying to flash the
chip but 
> I am not sure what the correct procedures are. Therefore, I was trying

> U-boot, and other possible approaches.  I have mpc8272 board. I have 
> BDI2000 as well. Could you Please show me the FLASH procedures that 
> tells how to use BDI2000 flash.
> 
> Thanks
> Jack

Hi.

You still haven't said what mpc8272 based board you are using!

Do you already have u-boot on the board, or are you trying to get it on
the board?

If you have an 8272ADS board and you are trying to get u-boot onto it I
recommend you use the file I mentioned in the last email and read the
BDI2000 manual to find out how to use it.

Good luck

Alex