[U-Boot-Users] Running U-boot on RAM

sathesh babu sathesh_edara2003 at yahoo.co.in
Tue Dec 19 19:10:35 CET 2006


Hi Denk,
   Could you clarify the following.
    - If we want use u-boot in embedded system, The initial part of u-boot runs from the Flash.So Flash is mandatory.
   
  My goal is :
     On my embedded platform, the flash is not yet ready.So i wanted to load u-boot on DDRAM/SRAM by changing the TEXT address and set PC to start of start () using JTAG debugger.
   
  could you please clarify Is it possible to boot from RAM as i mentioned above.
   
  Any environment variables are access from the Flash during u-boot bootup time.
   
  Regards,
  Sathesh
   

Wolfgang Denk <wd at denx.de> wrote:
  In message <998418.53833.qm at web7905.mail.in.yahoo.com> you wrote:
> 
> I would like to run complete u-boot image ( on MIPS processor) from SDRAM instead of flash.
> 
> Could you suggest me how to do?.

Please read the FAQ:
http://www.denx.de/wiki/view/DULG/CanUBootBeConfiguredSuchThatItCanBeStartedInRAM

> I think i need to change u-boot.lds script.

...and some other, highly critical things.

> --0-1947689139-1166413831=:53833
> Content-Type: text/html; charset=iso-8859-1
> Content-Transfer-Encoding: 8bit

Please never post HTML here.

Best regards,

Wolfgang Denk

-- 
Software Engineering: Embedded and Realtime Systems, Embedded Linux
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
Life would be so much easier if everyone read the manual.


 Send free SMS to your Friends on Mobile from your Yahoo! Messenger. Download Now! http://messenger.yahoo.com/download.php
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.denx.de/pipermail/u-boot/attachments/20061219/09ca922a/attachment.htm 


More information about the U-Boot mailing list