[U-Boot-Users] Peripheral initialization hooks

[Steve Strublic]

Thanks Shawn,

I think board_early_init_f() is a little too early to mess with the
Ethernet PHY.  However, I saw the hook for reset_phy() later on in
board_reset_r(), which is perfect.  So I hooked that for my board, and
voila!  

Steve

-----Original Message-----
From: Shawn Jin [mailto:shawnxjin at gmail.com] 
Sent: Monday, February 13, 2006 5:26 PM
To: Steve Strublic
Cc: u-boot-users at lists.sourceforge.net
Subject: Re: [U-Boot-Users] Peripheral initialization hooks

> Is it acceptable to modify board_init_r() to include a call to an
> enable/disable function that would only apply if my board were
defined?  Or
> are there any hooks for board-specific initializations?

The hooks are already there. I would recommend board_early_init_f() or
board_early_init_r() which can be turned on/off by the board
configuration header file.

Regards,
-Shawn.