[U-Boot-Users] Excluding Env Variable section from the u-boot.bin
wd at denx.de
Thu Jan 12 16:36:59 CET 2006
In message <0248B0F35AF7B8418CA72E88AC00BF1F5BB51E at lisi053a.siemens.pt> you wrote:
> As far as I understood / remember, you can have the
> environment and part of u-boot's code sharing the same
> sector, which makes it at least more difficult to upgrade
> the code using a BDI-like tool which usually works on
> a full-sector basis.
If you use a BDI, you need a 3 command sequence: dump, erase, prog.
This is not exactly difficult. And if you have U-Boot running you
just can use "saveenv". This is trivial.
Software Engineering: Embedded and Realtime Systems, Embedded Linux
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
I have a theory that it's impossible to prove anything, but I can't
More information about the U-Boot