[U-Boot-Users] 1.1.4 and 2.6 kernel

[alfred hitch]

Hi,

I have tried 1.1.4 also.
Tried ttyS1

Well only change from ixdp425 is memory related stuff and ttyS1
instead of default ttyS0 for console redirection.

I am really puzzled on this issue.
Can someone please give me any pointers ??

Cheers,,
Alfred

On 6/30/06, Stefan Roese <sr at denx.de> wrote:
> Hi Alfred,
>
> On Friday 30 June 2006 08:04, alfred hitch wrote:
> > I am sending dumps of my logs and what I did..
> > Anyone can give any pointers, I will really appreciate it.
> >
> > Boot up log:
> > -----------------------
> >
> > U-Boot 1.1.1.2 (Nov 17 2004 - 12:54:00)
>
> Pretty old. A major update of the IXP4xx port was done a few weeks ago. Please
> try to port your board support to the current version.
>
> > sB_CONFIG: 32MB_2CHIP
> > ----------------------------
> > U-Boot code: 00F80000 -> 00F90E64  BSS: -> 00F92374
> > RAM Configuration:
> > Bank #0: 00000000 16 MB
> > Flash: 32 MB
> > *** Warning - bad CRC, using default environment
> >
> > In:    serial
> > Out:   serial
> > Err:   serial
> > Hit any key to stop autoboot:  0
> > => setenv bootargs 'console=ttySAC01,115200 root=/dev/mtdblock4 rw,
>
> Try "ttyS0" or "ttyS1" as console parameter.
>
> <snip>
>
> > I created uImage using this command:
> >
> > ->> u-boot-mkimage -A arm -O linux -T kernel -C none -a 0x01600000 -e
> > 0x01600000 -n "Linux" -d ./zImage uImage
>
> Why didn't you just type "make uImage"? This result in a proper uImage to boot
> from U-Boot.
>
> BTW: We are using current U-Boot and current Linux 2.6 kernel on different
> IXP4xx boards without any problems (e.g. ixdpg425, pdnb3).
>
> Best regards,
> Stefan
>