[U-Boot-Users] Does the UBoot-1.1.4 support the RMII on PPC440GP?

[Denny]

I still failed to bring up my ethernet on my custom PPC440GP board,
1. auto-negotiations timeout
2. wrong speed(10M), and wrong mode (half duplex)
Can anyone tell me how the drivers for PPC440GP RMII interface goes, thanks a lot!
 
Below is my logs:
u-boot => tftp 0x100000 tmp.img
Trying ppc_4xx_eth0
the ZMII_FER = 0xe0000780
the ZMII_SSR = 0xe0000784
Waiting for PHY auto negotiation to complete..... TIMEOUT !
 done
ENET Speed is 10 Mbps - HALF duplex connection
Using ppc_4xx_eth0 device
TFTP from server 192.168.65.235; our IP address is 192.168.65.239
Filename 'tmp.img'.
Load address: 0x100000
Loading: T T T T T T T 
 
Thanks in advance!
- Denny
 
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.denx.de/pipermail/u-boot/attachments/20060713/bd51fc77/attachment.htm