[U-Boot-Users] My 3 patches

[Wolfgang Denk]

Dear JinHua Luo,

in message <20050902010558.M5503 at gd-linux.com> you wrote:
> 
> Here is my 3 patches. 

Thanks a lot for your contribution.

> sbc2410x.patch is for the new board -- SBC-2410X. I write this new
> hardware-specific configurations refer to smdk2410 configurations in U-Boot.

Applied, thanks.

> cmdline_editing.patch implements cmdline-editing extension of readline. I pick
> codes heavily borrowed from vivi bootloader and integrate them into U-Boot.

Applied, thanks a lot!

> This patch adds a new configuration option -- CONFIG_CMDLINE_EDITING.

...which should have been documented in the README (I did this for
you).

> nand_for_sbc2410x.patch adds nand support for SBC-2410X board.  It do that by
> taking nand controller specific codes (from VCMA9 board) in place.
> File list:
>  common/cmd_nand.c
>  include/linux/mtd/nand.h
>  include/linux/mtd/nand_ids.h

I did not add this patch, though. I think you will have to  adapt  it
to  the  current  (new)  NAND code first. Can you please do this, and
then resubmit this part? Thanks!

Best regards,

Wolfgang Denk

-- 
Software Engineering:  Embedded and Realtime Systems,  Embedded Linux
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
The light at the end of the tunnel is usually a "No Exit" sign.