[U-Boot-Users] 1.1.4 and 2.6 kernel

alfred hitch alfred.hitch at gmail.com
Fri Jun 30 08:04:59 CEST 2006


Hi All,

I am sending dumps of my logs and what I did..
Anyone can give any pointers, I will really appreciate it.

Boot up log:
-----------------------

U-Boot 1.1.1.2 (Nov 17 2004 - 12:54:00)
sB_CONFIG: 32MB_2CHIP
----------------------------
U-Boot code: 00F80000 -> 00F90E64  BSS: -> 00F92374
RAM Configuration:
Bank #0: 00000000 16 MB
Flash: 32 MB
*** Warning - bad CRC, using default environment

In:    serial
Out:   serial
Err:   serial
Hit any key to stop autoboot:  0
=> setenv bootargs 'console=ttySAC01,115200 root=/dev/mtdblock4 rw,
mem=64M at 0x00000000'
=> bootm 0x50040000
## Booting image at 50040000 ...
   Image Name:   Linux
   Image Type:   ARM Linux Kernel Image (uncompressed)
   Data Size:    951276 Bytes = 929 kB
   Load Address: 01600000
   Entry Point:  01600000
   Verifying Checksum ... OK
OK

Starting kernel ...

[And an eternal blank screen after this]

I created uImage using this command:

->> u-boot-mkimage -A arm -O linux -T kernel -C none -a 0x01600000 -e
0x01600000 -n "Linux" -d ./zImage uImage

Image Name:   Linux
Created:      Fri Jun 30 12:16:18 2006
Image Type:   ARM Linux Kernel Image (uncompressed)
Data Size:    951276 Bytes = 928.98 kB = 0.91 MB
Load Address: 0x01600000
Entry Point:  0x01600000


Do we need to change any steps in 2.6 (v/s 2.4) for creating uImage ?
Could / do my load address etc need to be changed ?

Cheers,
Alfred




More information about the U-Boot mailing list