[U-Boot-Users] Xilinx ML403/PPC U-Boot support

[Paula S]

Hi!

I'm using the ml403 as well, trying to boot from Flash, without SysACE. But
when I load u-boot, I get the message: 
### No HW ID - assuming ML403
DRAM:  64 MB
FLASH: ## Unknown FLASH on Bank 0 - Size = 0x00000000 = 0 MB
*** failed ***
### ERROR ### Please RESET the board ###

The flash address is ok in hw design.

Any help would be appreciated.
Thanks!
Paula

--
View this message in context: http://www.nabble.com/Sequence-of-Xilinx-ML403-PPC-t1009012.html#a3278946
Sent from the Uboot - Users forum at Nabble.com.