[U-Boot-Users] u-boot and at91rm9200 (on skyeye)

[Rohit]

Hi Guys,

I am trying to run u-boot on skyeye emulator. When i load the
u-boot.bin via skyeye. I can see the following output but then u-boot
hangs at the prompt. The same doesn't appear when i use the ep7321
binary image.

Also irrespective what i do i always get the mesage
Flash:  0 kB
or ATMEL Flash : 0Kb

This is my first time with both skyeye and u-boot. Any pointers are
most appreciated.

Best Regards,
rohit

Please let me know if you need any more info.

[root at localhost at91rm]# skyeye
SKYEYE: If you have ELF kernel file, please use -e option to indicate
your ELF format kernel filename
SKYEYE: If you only have kernel binary image, you should put the
filename of kernel binary image in skyeye.conf file
arch: arm
cpu info: armv4, arm920t, 41009200, ff00fff0, 2
mach info: name at91rm92, mach_init addr 0x8069ca0
uart info: input device is /dev/stdin, fd is 4.
uart info: output device is /dev/stdout, fd is 5.
SKYEYE: use arm920t mmu ops
Loaded RAM   ./u-boot.bin


U-Boot 1.1.4 (Mar 29 2006 - 14:29:46)

U-Boot code: 21F00000 -> 21F16470  BSS: -> 21F32E04
RAM Configuration:
Bank #0: 20000000 32 MB
Flash:  0 kB
*** Warning - bad CRC, using default environment

In:    serial
Out:   serial
Err:   serial
U-Boot>