[U-Boot-Users] [PATCH 1/11] Fix miscellaneous typos
Keith J Outwater
kjoutwater at raytheon.com
Fri May 5 19:10:09 CEST 2006
This patch fixes a few typos. No CHANGELOG entry due to trivial nature of
patch
diff --git a/README b/README
index 3ffef62..94d856c 100644
--- a/README
+++ b/README
@@ -1526,7 +1526,7 @@ The following options need to be configu
Adding this option adds support for Xilinx SystemACE
chips attached via some sort of local bus. The address
- of the chip must alsh be defined in the
+ of the chip must also be defined in the
CFG_SYSTEMACE_BASE macro. For example:
#define CONFIG_SYSTEMACE
@@ -1929,7 +1929,7 @@ to save the current settings.
environment area within the total memory of your EEPROM.
- CFG_I2C_EEPROM_ADDR:
- If defined, specified the chip address of the EEPROM device.
+ If defined, specifies the chip address of the EEPROM device.
The default address is zero.
- CFG_EEPROM_PAGE_WRITE_BITS:
diff --git a/lib_ppc/board.c b/lib_ppc/board.c
index e68cf1f..2dfbca0 100644
--- a/lib_ppc/board.c
+++ b/lib_ppc/board.c
@@ -586,7 +586,7 @@ #endif
*
* This is the next part if the initialization sequence: we are now
* running from RAM and have a "normal" C environment, i. e. global
- * data can be written, BSS has been cleared, the stack size in not
+ * data can be written, BSS has been cleared, the stack size is not
* that critical any more, etc.
*
************************************************************************
Signed-off-by: Keith Outwater <outwater4 at comcast.net>
More information about the U-Boot
mailing list