[U-Boot-Users] How to use UBoot for S3CEB2410 board

[thien van]

Hi Marco and all,

Thanks for your reply, but I want to config and compile U-Boot for S3CEB2410 without 
commercial support. 

Please help me how to customize and compile U-Boot for this board.

Thanks,
    
----- Original Message ----
From: Marco Cavallini <arm.linux at koansoftware.com>
To: thien van <nvthien1112 at yahoo.com>
Cc: u-boot-users at lists.sourceforge.net
Sent: Thursday, November 2, 2006 1:46:15 AM
Subject: Re: [U-Boot-Users] How to use UBoot for S3CEB2410 board

thien van ha scritto:
> Hi all,
> 
> I have bought a board at http://armkits.com/Product/s3ceb2410.asp and I am trying to use uboot to boot it from SMC card, Here are the steps I did:
.snip.

Hi,
it's a normal behaviour because smdk2410_config is targeted for Samsung 
Evaluation Board.
You must customize U-Boot for your board, if you need commercial support 
we can do that for you ;-)

regards,
-- 
Marco Cavallini
Koan s.a.s. - Bergamo - ITALIA
Embedded and Real-Time Software Engineering
  - Atmel Third Party Consultant
  - Intel PCA Developer Network Member
Tel. +39-(0)35-255.235 - Fax +39-178-223.9748
www.KoanSoftware.com   |    www.KaeilOS.com






-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.denx.de/pipermail/u-boot/attachments/20061101/5caa26eb/attachment.htm