[U-Boot-Users] [DNX#2006110242000056] [PATCH 03/10 v3]: mpc7448hpc2 platf [...]

[DENX Support System]

Hello list,

inside the automatic U-Boot patch tracking system a new ticket
[DNX#2006110242000056] was created:

<snip>
> Add mpc7448hpc2  (mpc7448 + tsi108)  board associated code support.
> The mpc7448hpc2 board support header file.
> 
> Signed-off-by: Alexandre Bounine <alexandreb at tundra.com>
> Signed-off-by: Roy Zang        <tie-fei.zang at freescale.com>
>  
> ---
>  include/configs/mpc7448hpc2.h |  453
> +++++++++++++++++++++++++++++++++++++++++
>  1 files changed, 453 insertions(+), 0 deletions(-)
> 
> diff --git a/include/configs/mpc7448hpc2.h
> b/include/configs/mpc7448hpc2.h
> new file mode 100644
> index 0000000..9243d58
> --- /dev/null
> +++ b/include/configs/mpc7448hpc2.h
> @@ -0,0 +1,453 @@
> +/*
> + * Copyright (c) 2005 Freescale Semiconductor, Inc.
> + *
> + * (C) Copyright 2006
> + * Alex Bounine , Tundra Semiconductor Corp.
> + * Roy Zang	, Freescale Corp.
> + *
> + * See file CREDITS for list of people who contributed to this
> + * project.
> + *
> + * This program is free software; you can redistribute it and/or
> + * modify it under the terms of the GNU General Public License as
> + * published by the Free Software Foundation; either version 2 of
> + * the License, or (at your option) any later version.
> + *
> + * This program is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
> + * GNU General Public License for more details.
> + *
> + * You should have received a copy of the GNU General Public License
> + * along with this program; if not, write to the Free Software
> + * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
> + * MA 02111-1307 USA
> + */
> +
> +/****************************************************************
> + *
> + * board specific configuration options for Freescale
> + * MPC7448HPC2 (High-Performance Computing II) (Taiga) board
> + *
> + ****************************************************************/
> +
> +#ifndef __CONFIG_H
> +#define __CONFIG_H
> +
> +#undef DEBUG
> +
> +/* Board Configuration Definitions */
> +/* MPC7448HPC2 (High-Performance Computing II) (Taiga) board */
> +
> +#define CONFIG_MPC7448HPC2
> +
> +#define CONFIG_74xx
> +#define CONFIG_750FX		/* this option to enable init of extended BATs */
> +#define CONFIG_ALTIVEC		/* undef to disable */
> +
> +#define CFG_BOARD_NAME       "MPC7448 HPC II"
> +#define CONFIG_IDENT_STRING  " Freescale MPC7448 HPC II"
> +
> +#define CFG_OCN_CLK         133000000	/* 133 MHz */
> +#define CFG_CONFIG_BUS_CLK         133000000
> +
> +#define CFG_CLK_SPREAD		/* Enable Spread-Spectrum Clock generation */
> +
> +#undef  CONFIG_ECC		/* disable ECC support */
> +
> +/* Board-specific Initialization Functions to be called */
> +#define CFG_BOARD_ASM_INIT
> +#define CONFIG_BOARD_EARLY_INIT_F
> +#define CONFIG_BOARD_EARLY_INIT_R
> +#define CONFIG_MISC_INIT_R
> +
> +/* Default MAC Addresses for on-chip GIGE Controller */
> +
> +#define CONFIG_ETHADDR      00:06:D2:00:00:01
> +
> +#define CONFIG_HAS_ETH1
> +#define CONFIG_ETH1ADDR     00:06:D2:00:00:02
> +
> +#define CONFIG_ENV_OVERWRITE
> +
> +/*
> + * High Level Configuration Options
> + * (easy to change)
> + */
> +
> +#define CONFIG_BAUDRATE    115200	/* console baudrate = 115000 */
> +
> +/*#define CFG_HUSH_PARSER */
> +#undef CFG_HUSH_PARSER
> +
</snip>

Your U-Boot support team